MB Tech N29 AUTO Stencil Cleaning Equipment
N29 AUTO
FEATURES
Fully automatic Ultrasonic and/or SUI Cleaning system
No contact with chemistry
Water based process in closed loop
Rinsing with filtered cleaning liquid
No water or drain connection
Magnetic driven pumps to avoid leaks
Drying system included.
SPECIFICATIONS
-
3.6 x 2.3 x 6.6 ft / 1.1 x 0.7 x 2 m
-
660 lb / 300 kg
-
230V Single phase + neutral 60Hz 16A ± 5% plug
Or 208V two phases 60Hz
-
Ultrasonic area: 22 x 18 in / 550 x 450mm
Power: 700 W
-
Volume: 32 gal / 120 L
Pumps: 2 magnetic driven or 1 magnetic and one centrifugal in Spray Under Immersion configuration
Filters: 2 standards 20in 5μm filters
Time cycle: 4 minutes solder paste ; 10 minutes adhesive approx
-
Crossflow fan max flow rate: 2 x 10 CFM / 2 x 17 m3/h
Heating element: 7 elements, 400W each
Time cycle: From 8 to 15 minutes approx
-
Frameless Stencil adapter: Standard sizes available, special sizes on request
Misprinted boards tool: Maximum area 20 x 20 in / 500 x 500 mm
Squeegee and tools: Stainless steel basket 20 x 1.6 x 3 in / 500 x 80 x 40 mm
*Specifications and appearance are subject to change without prior notice.
Contact us.
Corporate US Headquarters
Trans-Tec America LLC
7301 W. Boston Street
Chandler, AZ 85226
USA
Sales Inquiries
sales@trans-tec.com
+1.877.987.2678
Service Inquiries
service@trans-tec.com
+1.877.987.2678