MB Tech N29 SA 4 Stencil Cleaning Equipment
N29 SA 4
FEATURES
Ultrasonic Cleaning system
Water based process in close loop
Rinsing with filtered cleaning liquid
No water, no compressed air
Magnetic driven pumps to avoid leaks
Automated lift after cleaning cycle
Drying system included.
SPECIFICATIONS
-
3.6 x 2.3 x 3.3 ft / 1.1 x 0.7 x 1 m
-
550 lb / 250 kg
-
230V single phase 60Hz 16A ± 5% plug
Or 208V two phases 60Hz
-
Ultrasonic area: 22 x 18 in / 550 x 450mm
Power: 700 W
-
Volume: 14.5 gal / 55 L
Pumps: 2 magnetic driven
Filters: 2 standards 20in 5μm filters
Time cycle: 4 min solder paste ; 10 min glue approx
-
Crossflow fan max flow rate: 10 CFM / 17 m3 /h
Heating element: 1500W Stainless steel element
Time cycle: From 10 to 15 minutes approx
-
Frameless Stencil adapter: Std sizes available, special on request
Misprinted boards tool: Max area 20 x 20 in / 500 x 500 mm
Squeegee and tools: Stainless steel basket 20 x 1.6 x 3 in / 500 x 80 x 40 mm
*Specifications and appearance are subject to change without prior notice.
Contact us.
Corporate US Headquarters
Trans-Tec America LLC
7301 W. Boston Street
Chandler, AZ 85226
USA
Sales Inquiries
sales@trans-tec.com
+1.877.987.2678
Service Inquiries
service@trans-tec.com
+1.877.987.2678
